32. A licence holder ensures that the rate of flow and the volume of the following fluids are measured:(1) the fluid extracted from a well;
(2) the fluid injected into and withdrawn from a well;
(3) the fluid that enters, leaves, is used or is flared, vented or burned in an installation.
The measurements recorded must be expressed at a temperature of 15° C and a pressure of 101.325 kPa.
Where the measurements of the volume or flow of a fluid to be measured by the holder cannot be taken, the holder may estimate them. If so, the holder must, when they are sent to the Minister, indicate the circumstances preventing the holder from taking accurate measurements.
1251-2018O.C. 1251-2018, s. 32.