S-34.1, r. 1 - Regulation respecting petroleum exploration, production and storage in a body of water

Section 260 Disposition versions

2018-09-20

260. The authorization holder must send to the Minister, within the period provided for in section 100 of the Act, an end of activities report signed by an engineer including, in particular,

(1)  the number of the temporary closure authorization;

(2)  the name and contact information of the licence holder;

(3)  the type and name of the drilling installation, its registration number and the name of its owner;

(4)  the type of navigation equipment used;

(5)  the start and end dates of the work;

(6)  a summary of the work carried out according to the chronological order;

(7)  a summary of the abnormal meteorological conditions that caused an operation delay and the corrective measures taken;

(8)  a comparative analysis of the work carried out compared to the work provided for in the technical program;

(9)  an analysis of the efficiency of the temporary closure;

(10)  the well logs, in particular those interpreted, scaled in true vertical depth and the corrections made;

(11)  a lateral section of the well after the temporary closure indicating, in particular,

(a)  the mechanical conditions of the well after the closure; and

(b)  the other equipment installed or dropped in the well and not recovered;

(12)  the classification of the well determined according to Schedule 1;

(13)  the type of plugs used and the depth intervals of each plug;

(14)  in the case of the cement plugs, the type of cement used, its density, its additives and their proportions, its setting time and the volume used;

(15)  the verified position of each of the plugs; and

(16)  the completed annual inspection worksheet provided for in Schedule 2.

O.C. 1251-2018, s. 260.

Not in force

In force: 2018-09-20

260. The authorization holder must send to the Minister, within the period provided for in section 100 of the Act, an end of activities report signed by an engineer including, in particular,

(1)  the number of the temporary closure authorization;

(2)  the name and contact information of the licence holder;

(3)  the type and name of the drilling installation, its registration number and the name of its owner;

(4)  the type of navigation equipment used;

(5)  the start and end dates of the work;

(6)  a summary of the work carried out according to the chronological order;

(7)  a summary of the abnormal meteorological conditions that caused an operation delay and the corrective measures taken;

(8)  a comparative analysis of the work carried out compared to the work provided for in the technical program;

(9)  an analysis of the efficiency of the temporary closure;

(10)  the well logs, in particular those interpreted, scaled in true vertical depth and the corrections made;

(11)  a lateral section of the well after the temporary closure indicating, in particular,

(a)  the mechanical conditions of the well after the closure; and

(b)  the other equipment installed or dropped in the well and not recovered;

(12)  the classification of the well determined according to Schedule 1;

(13)  the type of plugs used and the depth intervals of each plug;

(14)  in the case of the cement plugs, the type of cement used, its density, its additives and their proportions, its setting time and the volume used;

(15)  the verified position of each of the plugs; and

(16)  the completed annual inspection worksheet provided for in Schedule 2.

O.C. 1251-2018, s. 260.