Consolidated Statutes and Regulations Consolidated Statutes Consolidated Regulations Annual Statutes and Regulations Annual Statutes Annual Regulations Additional information Québec Official Publisher What’s new? Information note Policy of the Minister of Justice Laws: Amendments Laws: Provisions not in force Laws: Provisions brought into force Annual Statutes: PDF versions since 1996 Regulations: Amendments Annual Regulations: PDF versions since 1996 Court Decisions

C-24.2, r. 32 - Regulation respecting safety standards for road vehicles

Section 100
Disposition versions

Full text
100. The driving shaft shall be adequate and not be warped, insecurely mounted, bent or cracked. The slip joint, the centre bearing and its support shall be adequate.
The universal joints of the driving shaft may not be loose, insecurely mounted and, if part of the original equipment, the shaft guard shall be present and securely mounted.
O.C. 1483-98, s. 100; O.C. 370-2016, s. 53.
100. The universal joints of the driving shaft shall not be loose, insecurely mounted and, if part of the original equipment, the shaft guard shall be present and securely mounted.
In the case of a 2-piece drive shaft, it shall not be warped or bent and the centre bearing, its support and the slip joint shall be adequate.
O.C. 1483-98, s. 100.
© Gouvernement du Québec