Consolidated Statutes and Regulations
Consolidated Statutes
Consolidated Regulations
Annual Statutes and Regulations
Annual Statutes
Annual Regulations
Additional information
Québec Official Publisher
What’s new?
Information note
Policy of the Minister of Justice
Laws: Amendments
Laws: Provisions not in force
Laws: Provisions brought into force
Annual Statutes: PDF versions since 1996
Regulations: Amendments
Annual Regulations: PDF versions since 1996
Court Decisions
C-24.2, r. 31 - Vehicle Load and Size Limits Regulation
Section 6
Disposition versions
6. The maximum length for any semi-trailer shall be:
(1) 16.2 m for those with the following specifications:
(a) they are equipped with a single axle, a tandem axle or a triple axle with spacing between the axles that is not more than 1.85 m, or a combination of axles of class B.44 or B.45;
(b) (subparagraph revoked);
(c) the distance between the centre of their single axle, tandem axle or triple axle and the centre of the king pin of the coupling device is not more than 12.5 m;
(d) the horizontal radius between the vertical axis passing through the centre of the king pin of the coupling device and the front of the semi-trailer does not exceed 2 m;
(1.1) (subparagraph revoked);
(2) 14.65 m for those that meet only the specifications prescribed by subparagraphs c and d of subparagraph 1;
(3) 10 m in all other cases.
Subparagraph c of subparagraph 1 of the first paragraph does not apply to lowered semi-trailers with a removable gooseneck.
6. The maximum length for any semi-trailer shall be:
(1) 16.2 m for those with the following specifications:
(a) they are equipped with a single axle, a tandem axle or a triple axle, and the axles are not more than 1.85 m apart;
(b) (subparagraph revoked);
(c) the distance between the centre of their single axle, tandem axle or triple axle and the centre of the king pin of the coupling device is not more than 12.5 m;
(d) the horizontal radius between the vertical axis passing through the centre of the king pin of the coupling device and the front of the semi-trailer does not exceed 2 m;
(1.1) 15.5 m for those equipped with a combination of axles of class B.44 or B.45 that meet the specifications covered by subparagraphs c and d of subparagraph 1;
(2) 14.65 m for those that meet only the specifications prescribed by subparagraphs c and d of subparagraph 1;
(3) 10 m in all other cases.
Subparagraph c of subparagraph 1 of the first paragraph does not apply to lowered semi-trailers with a removable gooseneck.
