S-34.1, r. 1 - Regulation respecting petroleum exploration, production and storage in a body of water

Article 120 Versions de la disposition

2018-09-20

120. The authorization holder must design and construct the well so as to

1°  comply with the Industry Recommended Practice, IRP: #25, Primary Cementing, published by the Drilling and Completions Committee;

2°  ensure work safety;

3°  prevent incidents in the maximum load conditions normally foreseeable during the life cycle of the well;

4°  withstand potential conditions, forces and stresses;

5°  ensure a resistance sufficient for fluid kicks;

6°  protect the integrity of the groundwater and the body of water;

7°  ensure that the petroleum zones and the aquifer layers are isolated from one another;

8°  allow the characterization of the geological formations targeted; and

9°  allow activities for controlling the pressure of the bottom of the wellbore in a constant and safe manner.

D. 1251-2018, s. 120.

Non en vigueur

In force: 2018-09-20

120. The authorization holder must design and construct the well so as to

1°  comply with the Industry Recommended Practice, IRP: #25, Primary Cementing, published by the Drilling and Completions Committee;

2°  ensure work safety;

3°  prevent incidents in the maximum load conditions normally foreseeable during the life cycle of the well;

4°  withstand potential conditions, forces and stresses;

5°  ensure a resistance sufficient for fluid kicks;

6°  protect the integrity of the groundwater and the body of water;

7°  ensure that the petroleum zones and the aquifer layers are isolated from one another;

8°  allow the characterization of the geological formations targeted; and

9°  allow activities for controlling the pressure of the bottom of the wellbore in a constant and safe manner.

D. 1251-2018, s. 120.