C-24.2, r. 43.1 - Ministerial Order concerning use of flexible folding aerodynamic systems for road vehicles

Full text
2. With respect to a flexible folding aerodynamic system installed at the rear of a road vehicle, the provisions of the second paragraph of section 4.1 of the Vehicle Load and Size Limits Regulation (chapter C-24.2, r. 31) are suspended and replaced by the following:
The same applies to the flexible folding aerodynamic system located at the rear of a road vehicle, provided that, as shown,
(1)  any part of the system located at more than 1.9 m from the ground does not exceed, when unfolded, by more than 152 cm the rear end of the vehicle;
(2)  any part of the system located at less than 1.9 m from the ground does not exceed, when unfolded, a virtual line connecting the following points:
(a)  a point located at 1.74 m from the ground and 121 cm from the rear end of the vehicle;
(b)  a point located at the rear end and the lowest part of the vehicle bumper or, if there is no bumper, a point located at the lowest part of the rear end of the vehicle;
(3)  any part of the system does not exceed, when folded, by more than 30.5 cm the rear end of the vehicle.
”.
2016-04M.O. 2016-04, s. 2.
In force: 2016-04-07
2. With respect to a flexible folding aerodynamic system installed at the rear of a road vehicle, the provisions of the second paragraph of section 4.1 of the Vehicle Load and Size Limits Regulation (chapter C-24.2, r. 31) are suspended and replaced by the following:
The same applies to the flexible folding aerodynamic system located at the rear of a road vehicle, provided that, as shown,
(1)  any part of the system located at more than 1.9 m from the ground does not exceed, when unfolded, by more than 152 cm the rear end of the vehicle;
(2)  any part of the system located at less than 1.9 m from the ground does not exceed, when unfolded, a virtual line connecting the following points:
(a)  a point located at 1.74 m from the ground and 121 cm from the rear end of the vehicle;
(b)  a point located at the rear end and the lowest part of the vehicle bumper or, if there is no bumper, a point located at the lowest part of the rear end of the vehicle;
(3)  any part of the system does not exceed, when folded, by more than 30.5 cm the rear end of the vehicle.
”.
2016-04M.O. 2016-04, s. 2.