Consolidated Statutes and Regulations
Consolidated Statutes
Consolidated Regulations
Annual Statutes and Regulations
Annual Statutes
Annual Regulations
Additional information
Québec Official Publisher
What’s new?
Information note
Policy of the Minister of Justice
Laws: Amendments
Laws: Provisions not in force
Laws: Provisions brought into force
Annual Statutes: PDF versions since 1996
Regulations: Amendments
Annual Regulations: PDF versions since 1996
Court Decisions
B-1.1, r. 2 - Construction Code
Section 8.02
Versions
8.02. For the purposes of this Chapter,
(1) the words and expressions used in the definition of petroleum product provided for in the Building Act (chapter B-1.1) have the meaning assigned to them by the Petroleum Products Regulation (chapter P-30.01, r. 2). In addition, the term “gasoline” includes the blendstock for oxygenate blending and the term “fuel” includes diesel fuel intended to serve as fuel in locomotive and ship engines;
(2) the definition of petroleum product provided for in the Building Act (chapter B-1.1) includes any other liquid mixture of hydrocarbons referred to in the Petroleum Products Regulation (chapter P-30.01, r. 2);
(3) petroleum products comprise the following classes:
(a) Class 1: liquid having a flash point below 37.8 °C determined according to the method provided by ASTM D56, Standard Test Method for Flash Point by Tag Closed Cup Tester, published by the American Society for Testing and Materials International;
(b) Class 2: liquid having a flash point equal to or above 37.8 °C but below 60 °C determined according to the method provided by ASTM D93, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester, published by the American Society for Testing and Materials International;
(c) Class 3: liquid having a flash point equal to or above 60 °C determined according to the method provided by ASTM D93, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester, published by the American Society for Testing and Materials International.
8.02. For the purposes of this Chapter,
(1) petroleum products are classified as follows:
(a) Class 1: petroleum distillates having a flash point below 37.8 °C as determined by D56, Standard Test Method for Flash Point by Tag Closed Tester, published by the American Society for Testing and Materials;
(b) Class 2: petroleum distillates having a flash point equal to or above 37.8 °C but below 60 °C as determined by D93, Standard Test Method for Flash-Point by Pensky-Martens Closed Cup Tester, published by the American Society for Testing and Materials; and
(c) Class 3: petroleum distillates having a flash point equal to or above 60 °C as determined by D93, Standard Test Method for Flash-Point by Pensky-Martens Closed Cup Tester, published by the American Society for Testing and Materials;
(2) fuel oil is of the following types:
(a) Nos. 0, 1 and 2: distillate fuel for home heating appliances;
(b) Nos. 4 and 5: a distillate, a residue or a blend of the two, used as fuel usually for burner installations without preheating devices; and
(c) No. 6: a distillate, a residue or a blend of the two, used as fuel for burner installations with a preheating device.
